Anchors, Galvanized

The Standard Twist Wire Anchor, #102, is manufactured from a one inch wide flat stock cut to a length of two inches, with two pre-punched fastener holes at each end and two "legs" formed from the center, for the intent of securing the #101 by placing the #101 eyelet (759120) over the #102 legs and then folding down the legs. Nails or screws are applicable to wooden substrates, 3/16" diameter compression anchors may be used on concrete decks, various screws are utilized on metal deck applications. Consult with the Roofmaster, to verify anchor securement.